User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL D2!
- Using Your D2—Getting Started
- Using Your D2—Getting Advanced
- Using Touch Strip
- Playing with Loops in HOTCUE Mode
- Playing with Loops in LOOP Mode
- Using FREEZE Mode
- Using FLUX Mode
- Remixing with Remix Decks
- Capturing Samples from Track Decks (Using Remix Mode)
- Adding FX
- Using Performance Modes on Remix Decks
- Using Step Sequencer Mode on Remix Decks
- Mixing Stem Files using Stem Decks
- Working with Beatgrids
- Hardware Reference
- Preferences Pane in TRAKTOR
- Troubleshooting - Getting Help
- Technical Specification
4. Rotate the Performance knobs clockwise to increase or counterclockwise to decrease the
FX SEND amount.
Additional Information about Performing with Stem Decks
Besides the aforementioned actions for performing on Stem Decks you can also make use of
setting Hotcues, applying Loops, using FREEZE mode, using FLUX mode, and using the Touch
Strip as you learned in previous tutorials.
It is not possible to capture Samples from Stem Files.
3.11.4 Adding another Stem File to the Mix
Equipped with the fundamental knowledge about performing on a Stem Deck you will now
learn to mix Stem File on Deck A with another Stem File on Deck B. For the best possible mix-
ing experience we recommend you use a second TRAKTOR KONTROL D2 controller. When on-
ly using one D2 controller you need to switch between the left and the right Deck Control posi-
tion.
3.11.4.1 Loading a Stem File into Deck B
We assume here you are using a second TRAKTOR KONTROL D2 controller.
Using Your D2—Getting Advanced
Mixing Stem Files using Stem Decks
TRAKTOR KONTROL D2 - Manual - 134