User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL D2!
- Using Your D2—Getting Started
- Using Your D2—Getting Advanced
- Using Touch Strip
- Playing with Loops in HOTCUE Mode
- Playing with Loops in LOOP Mode
- Using FREEZE Mode
- Using FLUX Mode
- Remixing with Remix Decks
- Capturing Samples from Track Decks (Using Remix Mode)
- Adding FX
- Using Performance Modes on Remix Decks
- Using Step Sequencer Mode on Remix Decks
- Mixing Stem Files using Stem Decks
- Working with Beatgrids
- Hardware Reference
- Preferences Pane in TRAKTOR
- Troubleshooting - Getting Help
- Technical Specification
▪ Each of the eight pads represent one step of the sequence.
▪ A pad will be dimmed in the color corresponding to the selected sample to indicate a step
that is not set.
▪ A pad will be fully lit in the color corresponding to the selected sample to indicate a step
that is set.
▪ An unlit pad indicates the step is not available. For example the amount of steps in the
sequence is 7 steps, thus the 8th pad does not lit.
▪ A white lit pad represents the current playhead position in the sequence.
3.10.1 Activating Step Sequencer Mode
In order to activate Step Sequencer mode, you need to perform the following actions:
1. In the TRAKTOR software assign a Deck i.e. Deck C to a Remix Deck.
⇨ The Deck’s Deck Flavor changes to Remix Deck. The Deck contains an empty Remix Set.
2. On the TRAKTOR KONTROL D2 controller focus the Remix Deck accordingly.
3. Press SHIFT+REMIX to activate Step Sequencer mode.
Using Your D2—Getting Advanced
Using Step Sequencer Mode on Remix Decks
TRAKTOR KONTROL D2 - Manual - 114