User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to MASCHINE
- Basic Concepts
- Important Names and Concepts
- Adjusting the MASCHINE User Interface
- Common Operations
- Pinning a Mode on the Controller
- Pinning a Mode on the Controller
- Undo/Redo
- List Overlay for Selectors
- Zoom and Scroll Overlays
- Focusing on a Group or a Sound
- Switching Between the Master, Group, and Sound Level
- Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area
- Using Two or More Hardware Controllers
- Touch Auto-Write Option
- Native Kontrol Standard
- Stand-Alone and Plug-in Mode
- Preferences
- Integrating MASCHINE into a MIDI Setup
- Syncing MASCHINE using Ableton Link
- Using Footswitches with the MASCHINE Controller
- Browser
- Browser Basics
- Searching and Loading Files from the Library
- Overview of the LIBRARY Pane
- Selecting or Loading a Product and Selecting a Bank from the Browser
- Selecting a Product Category, a Product, a Bank, and a Sub-Bank
- Selecting a File Type
- Choosing Between Factory and User Content
- Selecting Type and Mode Tags
- List and Tag Overlays in the Browser
- Performing a Text Search
- Loading a File from the Result List
- Additional Browsing Tools
- Using Favorites in the Browser
- Editing the Files’ Tags and Properties
- Loading and Importing Files from Your File System
- Locating Missing Samples
- Using Quick Browse
- Managing Sounds, Groups, and Your Project
- Playing on the Controller
- Working with Plug-ins
- Plug-in Overview
- The Sampler Plug-in
- Using Native Instruments and External Plug-ins
- Using the Audio Plug-in
- Using the Drumsynths
- Using the Bass Synth
- Working with Patterns
- Pattern Basics
- Recording Patterns in Real Time
- Recording Patterns with the Step Sequencer
- Editing Events
- Recording and Editing Modulation
- Creating MIDI Tracks from Scratch in MASCHINE
- Managing Patterns
- Importing/Exporting Audio and MIDI to/from Patterns
- Audio Routing, Remote Control, and Macro Controls
- Audio Routing in MASCHINE
- Using MIDI Control and Host Automation
- Creating Custom Sets of Parameters with the Macro Controls
- Controlling Your Mix
- Using Effects
- Effect Reference
- Working with the Arranger
- Arranger Basics
- Using Ideas View
- Using Arranger View
- Section Management Overview
- Creating Sections
- Assigning a Scene to a Section
- Selecting Sections and Section Banks
- Reorganizing Sections
- Adjusting the Length of a Section
- Assigning and Removing Patterns
- Duplicating Sections
- Removing Sections
- Renaming Scenes
- Clearing Sections
- Creating and Deleting Section Banks
- Enabling Auto Length
- Looping
- Playing with Sections
- Triggering Sections or Scenes via MIDI
- The Arrange Grid
- Quick Grid
- Sampling and Sample Mapping
- Appendix: Tips for Playing Live
- Troubleshooting
- Glossary
- Index
(8) MIDI output settings (Sound strips only): Allows you to select a MIDI output. Visible only if
the IO button is enabled on the left of the Mixer. Click the MIDI OUT label to select a MIDI
output port, then select a channel via the additional menu on the right. These controls are
equivalent to the Dest. and Channel selectors in the MIDI page of the Sound’s Output proper-
ties (see ↑11.2.5, Sending MIDI from Sounds).
Parameter modulation is not indicated in the Mixer. As a consequence, the value of
modulated parameters might change even if their control elements stay at a fixed posi-
tion in the Mixer. For example, if the fader of a channel strip is fully down but the chan-
nel level is being modulated, the channel’s actual level might temporarily exceed the
fader position, leading to an audible signal (and visible meter activity!) although the fad-
er is fully down. In Arrange view, on the other hand, the Control area indicates the mod-
ulation of continuous parameters via the ring around their knob. See section ↑10.5, Re-
cording and Editing Modulation for more on modulating parameters.
Available Settings in the Master and Cue Channel Strips
The Master and the Cue channel strips are similar to the Sound/Group channel strips described
above, except for the following elements (numbers refer to the picture in the previous para-
graph):
▪ The Mute button in the Fader section (5) is not available.
▪ The audio input settings (2) and MIDI input settings (3) are not available.
▪ The aux routing settings (7) and MIDI output settings (8) are not available.
▪ There is no Plug-in List (4) in the Cue channel strip.
12.2.6 Using the Cue Bus
MASCHINE provides a dedicated Cue bus. This Cue bus allows you to route any channel
(Sound or Group) on a separate output while leaving the main MASCHINE output untouched.
For example, you can use it to prepare any Sound or Group in your headphones during a live
session: first send the empty channel to the Cue bus, then load the desired Sound or Group
from the Browser (or create one from scratch), add any Plug-ins, adjust any parameters in that
channel, record Patterns for that Group as you see fit, and when you are ready, insert it back
into your performance!
The Cue bus is also used for following features:
Controlling Your Mix
The Mixer
MASCHINE STUDIO - Manual - 615