User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
The front panel of the TRAKTOR KONTROL S2.
Headphones socket (PHONES) : Cue channel stereo output (jack 1/4"). Connect your headphones
here.
Headphones Volume knob (CUE VOL) : Adjusts the volume in your headphones here.
Headphones Mix knob (CUE MIX) : Adjusts the mix between master output and cue channel in
your headphones here.
MIC ENGAGE switch : Engage the switch to turn on the microphone channel. The socket for the
Microphone is situated on the rear panel (see ↑6.2.1, MIC Section).
Except for the MIC ENGAGE switch, all knobs on the front panel are retractable: by push-
ing them softly, you can hide them within the body of your controller to protect them
against shocks during transport!
6.4 Types of Control Elements
Your TRAKTOR KONTROL S2 holds various types of control elements, which we will quickly
describe here.
Hardware Overview
Types of Control Elements
Traktor Kontrol S2 - Manual - 97