User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
6.2.3 POWER Section
The POWER section holds the sockets for the connection of your S2 to your computer and to
the power, along with the ON/OFF switch.
The POWER section on the rear panel.
USB socket : Connect here your S2 to your computer with the included USB cable, or to your
iOS device via the included Native Instruments iOS cable.
If possible, do always use the USB cable provided with the S2 box to operate your unit.
Lower quality USB cables can affect transmission quality and ultimately worsen the S2's
performance.
Power Supply connector : Connect here the power cord.
ON/OFF switch : Engage the switch to turn on your device.
6.3 The Front Panel
This section describes all sockets and controls available on the front panel of your TRAK-
TOR KONTROL S2. The front panel of your S2 holds elements you might need during your
mix.
Hardware Overview
The Rear Panel
Traktor Kontrol S2 - Manual - 96