User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Equivalent elements on the controlled Deck in TRAKTOR.
On your TRAKTOR KONTROL S2 controller, each Deck provides you with:
▪ a multi-function jog wheel with advanced transport functionality via its top plate (1) and
outer rim (2).
▪ a Tempo unit (3) to adjust the playback speed.
▪ a Loop section (4) for setting and modifying loops.
▪ a CUE/REMIX SLOTS section (5) for setting and triggering Cue Points (or samples; see ↑7.5,
Using the CUE/REMIX SLOTS Section for further reference).
▪ the traditional PLAY and CUE buttons (6).
▪ Both Decks also provide a SHIFT button (7): when held depressed, this button modifies the
function of many other control elements (see section ↑7.1.3, SHIFT Buttons: Accessing
Secondary Functions for more info).
▪ a FLUX button (8) to engage a TRAKTOR's Flux Mode.
Hardware Overview
Top Panel - Main Areas
Traktor Kontrol S2 - Manual - 90