User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
7. Now turn FX Knob 1 all the way to the right.
You will hear the amount of the Delay effect increasing and observe that the Effects Dis-
play moves to diagonally as both the Effect parameter moves to the both along the X axis
and up the Y axis.
8. Now turn both of these knobs to the left. You will hear the amount of the effect applied
lessens.
9. Now press FX buttons 2 and 3, so that all 3 FX buttons are engaged.
All three FX buttons are now illuminated orange, and you will now hear that the track
playing is affected by 3 of TRAKTOR DJ's effects.
Using the S2 with TRAKTOR DJ
Using FX
Traktor Kontrol S2 - Manual - 86