User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
4. Using the FX 1 section (located in the top-left) of the S2, press FX button 1.
The button will illuminate orange; you will also be able to hear the Delay effect being ap-
plied to the track playing.
5. Move the FX knob 1 to either the left or the right.
Observing TRAKTOR DJ, you will notice that your movements with the FX knob control the
corresponding X axis in TRAKTOR DJ. Moving the FX knob to the right subsequently
moves the Delay effect along its X axis.
6. With the effect still engaged, move the DRY/WET knob to the right.
You will hear the amount of the Delay effect increase. This movement is mirrored on the Y
axis within TRAKTOR DJ's Effects display.
Using the S2 with TRAKTOR DJ
Using FX
Traktor Kontrol S2 - Manual - 85