User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
→
The effects display of TRAKTOR DJ will be revealed for the corresponding Deck. You will
notice that the top of this Effects display contains three effects. Each of these represents
the currently available effect as part of a bank.
To change the individual effects as part of the TRAKTOR DJ effects bank, you will need to
manually select these within TRAKTOR DJ. Simply press the relevant effect section to re-
veal the drop down menu of 8 available effects in that bank.
The Effects Display section of TRAKTOR DJ.
5.3.2 Using the S2's FX Section
The S2 contains two FX sections, located above each of the jog wheels. Here you can trigger
effects in TRAKTOR DJ by pressing the FX buttons (1-3), turn their corresponding FX knobs to
control their effect parameter (visible along the X axis in TRAKTOR DJ), and further manipu-
late effect variables by using the DRY/WET knob which (visible along the Y axis in TRAK-
TOR DJ).
Triggering and Controlling an Effect
Pressing any of the S2's FX buttons (1-3) (located in the FX 1 or FX 2 sections) will engage the
corresponding TRAKTOR DJ effect. When a button is pressed, you will notice that it illumi-
nates orange. Within the Effects display of TRAKTOR DJ, the corresponding FX bank will also
be highlighted orange.
Follow the below tutorial to familiarize yourself with how to utilize the S2 to control TRAK-
TOR DJ's effects:
1. Load a track into Deck A and begin playback.
2. Press FX button 1 at the top of Channel A to reveal TRAKTOR DJ's Effect display.
3. In TRAKTOR DJ, if not already selected by default, ensure the Delay effect is selected in
the left-most bank.
Using the S2 with TRAKTOR DJ
Using FX
Traktor Kontrol S2 - Manual - 84