User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Holding SHIFT + turning the Loop MOVE encoder to adjust TRAKTOR DJ's viewing scale.
When in Freeze Mode, turning the Loop MOVE encoder can be used to move around the as-
signments.
►
Turning the Loop MOVE encoder, will move the Freeze assignments by the group size of
assignments. Pressing and rotating the Loop MOVE encoder moves the assignments by
one assignment size.
5.3 Using FX
This section is designed to get you swiftly up to speed with understanding how to deploy
TRAKTOR DJ's effects. Follow the below tutorials to gain an understanding of how the S2 can
be used to control them.
TRAKTOR DJ has three banks of available effects, each of which contains eight effects.
5.3.1 Reveal a Deck's Effect Display
You can use the S2 to reveal a Deck's Effect display in TRAKTOR DJ by:
►
Pressing FX button 1, located at the top of channel section A or B.
Using the S2 with TRAKTOR DJ
Using FX
Traktor Kontrol S2 - Manual - 83