User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Triggering Hotcue button 4 in TRAKTOR DJ's Loop Slicer mode.
Whilst in Loop Slicer mode, you have the opportunity to move the start point of the Loop by
turning the Move Encoder. Turning to the left moves the start point of the loop to an earlier
point in the playing track, whilst to the right a latter point. Pressing and rotating the Move
encoder will move the Loop by 1 Beat
Whilst triggering the green Hotcue buttons in Loop Slicer Mode, experiment with turning
the Loop Encoder to adjust the loop size for some interesting creative results.
5.2.7 Using the Loop MOVE Encoders
The Loop MOVE encoders serve a number of purposes when used with TRAKTOR DJ. The de-
fault mode of these encoders allows you Beatjump forwards or backwards in a tracks. Turning
to the left moves backwards in the track, whereas to the right forward.
Using the S2 with TRAKTOR DJ
Using the Transport Section
Traktor Kontrol S2 - Manual - 80