User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
The Mixer section of the S2, and the corresponding TRAKTOR DJ Equalizer section.
In TRAKTOR DJ, Deck A is located at the top, and Deck B found below. In TRAKTOR DJ for
the iPhone, the deck view slider indicates that Deck A is located at the top and B at the bot-
tom.
5.1.3
Using the Filters
The primary function of the S2’s GAIN/FILTER encoders controls TRAKTOR DJ's Filter effect
for the corresponding Deck. To engage:
►
Turn the GAIN/FILTER encoder. Turning clockwise cuts the low end frequencies, whereas
turning counter clockwise cuts the high end. You'll also notice that when you move a
GAIN/FILTER encoder clockwise (right), the Filter also moves to the right along its X axis
within TRAKTOR DJ, and vice a versa counter clockwise.
To reveal the Filter display of TRAKTOR DJ Deck:
►
Touch your finger on the Filter section of a TRAKTOR DJ Decks Equalizer display.
Using the S2 with TRAKTOR DJ
Key S2 Functions Using TRAKTOR DJ
Traktor Kontrol S2 - Manual - 68