User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
The Remix Deck C with the Advanced Panel on bottom. On the lower right you can see the cursor pointing on the Play Type
button, which switches the Sample Cell from One-shot to Loop mode and vice versa.
►
Click on the Play Type button in the lower right of the Advanced Panel (see screenshot
above) to switch the Sample to One-shot mode if you wish.
In One-shot mode, pressing the relevant CUE/REMIX SLOTS button when a Sample is playing
results in the Sample Slot being stopped.
Pressing SHIFT + CUE/REMIX SLOTS button once more after stopping Sample playback
will clear the Sample from the Sample Slot.
In case you don’t hear the playing (unmuted) Sample, check that channel C’s fader is raised in
the TRAKTOR software.
4.5.3 Capturing a Sample from a Track Deck
We have seen how you can load Samples directly into one of the Remix Decks using TRAK-
TOR’s Browser, but here’s an even cooler performance feature:
1. Check that the track “Techno 2” is still playing on the right Deck (Deck B in TRAKTOR).
If not, start its playback by pressing PLAY. (If the playback has reached the end of the
track, press SHIFT + CUE to skip back to start.)
2. To activate Remix Deck mode for the right Deck, press the right REMIX Mode button (la-
beled “B”) below the Remix Knob.
Tutorials
Using Samples in Your Mix
Traktor Kontrol S2 - Manual - 51