User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
1. Press the A button below the REMIX knob in the middle of the Mixer.
This switches the CUE/REMIX SLOTS buttons on the controller to Remix Deck mode. The
A button lights up, and the four CUE/REMIX SLOTS buttons 1-4 now control the four
Sample Slots of Remix Deck C in the software.
2. Hold SHIFT and turn the BROWSE encoder to select the Track Collection folder from the
Browser Tree. While keeping SHIFT depressed, press the BROWSE encoder button to ex-
pand the folder node.
3. Hold SHIFT and turn the BROWSE encoder to select the All Remix Sets folder from the
Browser Tree. While keeping SHIFT depressed, press the BROWSE encoder button to ex-
pand the folder node.
4. Hold SHIFT and turn the BROWSE encoder to select the Dirty Trap folder from the Brows-
er Tree.
5. Release SHIFT and turn the BROWSE encoder to highlight the Sample “C3 Bells #1” in
the Playlist.
6. On the left Deck, press SHIFT plus one of the CUE/REMIX SLOTS buttons (let’s say the
first one) to load the Sample into that particular Remix Slot:
You can do this in the software too: simply drag and drop the sample from the list onto any
Sample Slot.
The Sample is now loaded and ready to play:
▪ In TRAKTOR, the Remix Deck C now holds the Sample in the upper Sample Cell of the
first Sample Slot.
Tutorials
Using Samples in Your Mix
Traktor Kontrol S2 - Manual - 49