User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
▪ The BROWSE encoder (in the center of the Mixer):
▪ The left Deck’s LOAD button (labeled "A" below the BROWSE encoder):
While looking at the TRAKTOR software window, do the following:
1. Hold SHIFT and turn the BROWSE encoder to select the Playlists folder from the Browser
Tree. While keeping SHIFT depressed, press the BROWSE encoder button to expand the
folder node.
2. Hold SHIFT and turn the BROWSE encoder to select the Demo Tracks Playlist
The tracks of the Demo Tracks Playlist appear below (in case you can't find the Demo
Tracks Playlist here, you can also open it from the Browser Tree's Explorer node):
3. Release SHIFT and turn the BROWSE encoder to scroll through the Playlist and navigate
to the track Techno 1.
Tutorials
Playing Your First Track
Traktor Kontrol S2 - Manual - 26