User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Control element Function
Load buttons A/B (below
BROWSE encoder)
Normal: loads selected track on the respective Deck.
SHIFT: copies and pastes the content of the opposite Track Deck to the Deck.
Lights up when you press the jog wheel’s top plate.
BROWSE encoder Turn: scrolls through the Playlist.
SHIFT + turn: scrolls through the Browser Tree.
SHIFT + press: expands/collapses folder nodes in the Browser Tree
Push: activates/deactivates Browse mode.
Push + turn: jumps through the Playlist by 10 steps.
Appendix C – Quick References
Browsing, Loading and Copying Quick Reference
Traktor Kontrol S2 - Manual - 174