User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
13.3 FX Unit Quick Reference
See section ↑7.8, Using the FX Units for more details on these control elements.
Control element Single mode Group mode
FX On button Normal: activates/deactivates FX Unit
globally (lit when activated).
SHIFT: selects next FX from FX list (as
set in Preferences > Effects > FX Pre-
Selection).
Normal: not used.
SHIFT: loads a set of three predefined FX
(as set in Preferences > TRAKTOR KON-
TROL S2 > S2 Control Options > Direct
FX 1-3).
FX DRY/WET knob Adjusts the ratio between unprocessed (dry) signal and processed (wet) signal.
FX Knob 1-3 FX parameter 1-3 (FX-dependent). Parameter for 1st, 2nd, and 3rd FX.
FX Button 1-3 FX Button 1: resets all FX parameters
to their default value.
FX Buttons 2 and 3: FX-dependent (lit
when activated).
SHIFT + button: loads a predefined FX
(as set in Preferences > TRAK-
TOR KONTROL S2 > S2 Control Op-
tions > Direct FX 1-3).
Activates/deactivates FX slot 1-3 (lit when
slot activated).
SHIFT + button: loads in this slot the next
FX from FX list (as set in Preferences > Ef-
fects > FX Pre-Selection).
13.4 Browsing, Loading and Copying Quick Reference
See section ↑7.9, Browsing, and Loading for more details on these control elements.
Appendix C – Quick References
FX Unit Quick Reference
Traktor Kontrol S2 - Manual - 173