User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Hardware controller and software side by side.
(1) Decks: TRAKTOR KONTROL S2 provides you with two physical Decks. The Decks are the
place where tracks (and Samples) are controlled. They can be seen as the equivalent to the
good old vinyl or CD decks, but with a bunch of additional features and the flexibility of a com-
puter-based system connected to them. The left Deck on your S2 controls Track Deck A in the
software. The right Deck on your S2 controls Track Deck B in the software. Additionally, you
can gain control over TRAKTOR's Remix Decks C and D with the controller's CUE/REMIX
SLOTS section. For that, the CUE/REMIX SLOTS section needs to be switched to Remix Deck
TRAKTOR KONTROL S2 Quick Overview
Traktor Kontrol S2 - Manual - 17