User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
13 Appendix C – Quick References
This appendix provides you with Quick Reference tables summing up the basic functionality of
each control element on your TRAKTOR KONTROL S2. This gives you a quick and concise
overview of all basic functions of your controller. For more info on each control element, please
refer to the descriptions in chapter ↑6, Hardware Overview.
13.1 Quick Reference
See chapter ↑7, Hardware Control Reference for more details on these control elements.
Control element Function
Remix Mode buttons A/B (be-
low REMIX knob)
Switches the CUE/REMIX SLOTS buttons to Remix Deck mode. Lit when
Remix Deck mode is enabled. See ↑7.5, Using the CUE/REMIX SLOTS Sec-
tion for more info on the CUE/REMIX SLOTS section modes.
Load buttons A/B (below
BROWSE encoder)
Normal: loads selected track on the respective Deck.
SHIFT: copies and pastes the content of the opposite Track Deck to the
Deck.
Lights up when you press the jog wheel’s top plate.
Jog wheel Outer rim: tempo bending.
Top plate: scratch control (direct control on playback position).
SHIFT + top plate: seek through track (fast forward / rewind).
In Loop: hold LOOP IN / LOOP OUT button and spin the jog wheel to fine-
tune the Loop In Point / Loop Out Point.
Tempo fader Increases/decreases Deck tempo.
Hold SHIFT to move the fader without altering the tempo.
FLUX buttons Engage TRAKTOR’S Flux mode when pressed.
Press SHIFT + FLUX to reset a Deck’s tempo.
Appendix C – Quick References
Quick Reference
Traktor Kontrol S2 - Manual - 169