User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
Assigning FX Units to Channels
The FX Units can be assigned to any number of channels in order to process the signals com-
ing from the corresponding Decks. To do this, use the FX Assign buttons on the desired chan-
nels.
You can activate two additional FX Units in the Preferences of TRAKTOR. Using four FX Units
instead of two implies a few changes in the FX routing scheme.
7.9 Browsing, and Loading
Your S2 makes the process of finding tracks and samples and loading them on to the desired
Decks or Sample Slots easy:
You will find in ↑13.3, FX Unit Quick Reference a Quick Reference table summing up the
basic functionality of each control element needed for browsing, loading and copying.
Browsing Tracks and Samples
You can quickly select tracks and samples for loading via the BROWSE encoder, located in the
center of the Mixer:
Hardware Control Reference
Browsing, and Loading
Traktor Kontrol S2 - Manual - 129