User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
7.7.7 Headphones Cue Button
The Headphones Cue button.
The Headphones Cue button (CUE) allows you to send the channel’s signal to the cue channel
— in other words, to your headphones. This is a basic feature for DJing, since it allows you to
pre-listen the audio playing on that channel before sending it to the audience.
►
Press the CUE button to send the channel’s signal to your headphones.
The Headphones CUE button lights up when activated, i.e., when the corresponding channel is
sent to the cue channel.
See section ↑4.2.2, Using Headphones to Prepare the Mix for further instructions on using the
CUE MIX function.
7.7.8 Master Display
The Master Display.
The Master Display provides you with some vital information for your TRAKTOR KONTROL S2
system.
Alert Indicator
The Alert indicator.
Hardware Control Reference
Using the Mixer
Traktor Kontrol S2 - Manual - 124