User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Welcome to the World of TRAKTOR KONTROL S2!
- 2 TRAKTOR KONTROL S2 Quick Overview
- 3 Preparing Your Music Library
- 4 Tutorials
- 4.1 Playing Your First Track
- 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
- 4.2.2 Using Headphones to Prepare the Mix
- 4.2.3 Synchronizing the Second Track
- 4.2.4 Setting a Cue Point as Starting Point
- 4.2.5 Interlude: In Case the Left Track Has Reached Its End
- 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
- 4.2.7 Doing Everything by Hand
- 4.3 Adjusting Levels
- 4.4 Looping and Cueing
- 4.5 Using Samples in Your Mix
- 4.6 Adding FX
- 4.7 Synchronization
- 5 Using the S2 with TRAKTOR DJ
- 6 Hardware Overview
- 7 Hardware Control Reference
- 8 Customizing TRAKTOR KONTROL S2
- 9 The S2 Audio Interface and Control Panel
- 10 Troubleshooting and Help
- 11 Appendix A – Common Setups
- 12 Appendix B – Technical Information
- 13 Appendix C – Quick References
- Index
►
Turn each EQ knob clockwise to emphasize the corresponding frequency band, and coun-
ter-clockwise to attenuate this band. At center detent position, the knob does not alter
the signal.
TRAKTOR provides you with various types of EQ, each of them having its own “personality.
“ You can choose the EQ type in Preferences > Mixer > EQ Selection. For more info, please
refer to the TRAKTOR 2 Manual.
7.7.3 FX Assign Buttons
The FX Assign buttons.
The FX Assign buttons (labeled “1” and “2”) below the GAIN/FILTER encoder allow you to as-
sign the channel and its corresponding Deck both to the desired FX Units (normal layer) and to
a particular side of the crossfader (Shift layer).
For the FX Unit assignment, press the left or right button to assign this channel to the FX Unit 1
or 2, respectively. The button lights up when the channel is routed to the corresponding FX
Unit. When activating both buttons on the same channel, FX Unit 1 and FX Unit 2 will process
the channel’s signal in series.
For a description of the FX Units on your S2, please refer to section ↑7.8, Using the FX
Units.
Hardware Control Reference
Using the Mixer
Traktor Kontrol S2 - Manual - 121