User Manual
Table Of Contents
- Title Page
 - Disclaimer
 - Contact
 - Table of Contents
 - 1 Welcome to the World of TRAKTOR KONTROL S2!
 - 2 TRAKTOR KONTROL S2 Quick Overview
 - 3 Preparing Your Music Library
 - 4 Tutorials
- 4.1 Playing Your First Track
 - 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
 - 4.2.2 Using Headphones to Prepare the Mix
 - 4.2.3 Synchronizing the Second Track
 - 4.2.4 Setting a Cue Point as Starting Point
 - 4.2.5 Interlude: In Case the Left Track Has Reached Its End
 - 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
 - 4.2.7 Doing Everything by Hand
 
 - 4.3 Adjusting Levels
 - 4.4 Looping and Cueing
 - 4.5 Using Samples in Your Mix
 - 4.6 Adding FX
 - 4.7 Synchronization
 
 - 5 Using the S2 with TRAKTOR DJ
 - 6 Hardware Overview
 - 7 Hardware Control Reference
 - 8 Customizing TRAKTOR KONTROL S2
 - 9 The S2 Audio Interface and Control Panel
 - 10 Troubleshooting and Help
 - 11 Appendix A – Common Setups
 - 12 Appendix B – Technical Information
 - 13 Appendix C – Quick References
 - Index
 
Playback state CUE/REMIX SLOTS button
Sample stopped Press to start playback.
Sample playing Press to stop playback and reset it to start position.
In Loop mode, the Sample will be played back in loop. The CUE/REMIX SLOTS button acts as
follows:
Playback state CUE/REMIX SLOTS button
Sample stopped Press to start playback.
Sample playing Press to mute/unmute the Sample.
Press SHIFT + the relevant button to stop playback and return to the Sample's
starting point.
Unloading a Sample
You  can  clear  a  stopped  Sample  Slot  by  pressing  SHIFT  +  the  relevant  CUE/REMIX  SLOTS
button.  In  case  the  Sample  in  the  Sample  Slot  is  playing,  pressing  SHIFT  +  CUE/REMIX
SLOTS  button  will  stop  its  playback.  By  carrying  out  this  command  again,  it  will  clear  the
Sample Slot and the button’s LED turns off.
7.6 Using the Transport Control Area
7.6.1 CUE and PLAY Button
The CUE and PLAY buttons.
At the bottom of the Deck, the CUE and PLAY buttons are the usual transport controls for the
Deck.
Hardware Control Reference
Using the Transport Control Area
Traktor Kontrol S2 - Manual - 115










