User Manual
Table Of Contents
- Title Page
 - Disclaimer
 - Contact
 - Table of Contents
 - 1 Welcome to the World of TRAKTOR KONTROL S2!
 - 2 TRAKTOR KONTROL S2 Quick Overview
 - 3 Preparing Your Music Library
 - 4 Tutorials
- 4.1 Playing Your First Track
 - 4.2 Mixing In a Second Track
- 4.2.1 Loading and Playing the Second Track
 - 4.2.2 Using Headphones to Prepare the Mix
 - 4.2.3 Synchronizing the Second Track
 - 4.2.4 Setting a Cue Point as Starting Point
 - 4.2.5 Interlude: In Case the Left Track Has Reached Its End
 - 4.2.6 Mixing In the Track by Using the Channel EQ and Filter
 - 4.2.7 Doing Everything by Hand
 
 - 4.3 Adjusting Levels
 - 4.4 Looping and Cueing
 - 4.5 Using Samples in Your Mix
 - 4.6 Adding FX
 - 4.7 Synchronization
 
 - 5 Using the S2 with TRAKTOR DJ
 - 6 Hardware Overview
 - 7 Hardware Control Reference
 - 8 Customizing TRAKTOR KONTROL S2
 - 9 The S2 Audio Interface and Control Panel
 - 10 Troubleshooting and Help
 - 11 Appendix A – Common Setups
 - 12 Appendix B – Technical Information
 - 13 Appendix C – Quick References
 - Index
 
Quick Loading a Sample from the Playlist
By  holding  SHIFT  and  pressing  an  unlit  CUE/REMIX  SLOTS  button,  you  load  the  selected
Sample from the currently active Playlist into the Sample Slot.
Playback Controls in Loop and One-shot Mode
Once a Sample is loaded into a Sample Slot, the relevant CUE/REMIX SLOTS button controls
its  playback.  Its  functionality  depends  on  the  Sample’s  Play  Type  (Loop  or  One-shot  mode).
You  can  select  the  Sample's  Play  Type  from  the  Advanced  Panel  of  a  Remix  Deck.  The  Ad-
vanced Panel is not always visible, depending on the current Deck Layout; repeatedly double-
click the Deck's upper border to cycle through the Deck Layouts until the Advanced Panel be-
comes visible.
The Remix Deck C with the Advanced Panel on bottom. On the lower right you can see the cursor pointing at the Play Type
button, which switches between One-shot and Loop mode for the currently selected Sample Cell.
Click on the Play Type button in the lower right of the Advanced Panel to switch between Loop
and One-shot mode for a Sample.
In One-shot mode, the whole Sample will be played once. The CUE/REMIX SLOTS button acts
as follows:
Hardware Control Reference
Using the CUE/REMIX SLOTS Section
Traktor Kontrol S2 - Manual - 114










