User Manual

When using TRAKTOR DJ, there are occasions when a Deck is in a Half-Sync state. This is
when the BPMs of the Decks match, but the phase alignment does not. For example:
▪ With two tracks playing, scratching one of the Jog Wheels (without a FLUX button engag-
ed) and releasing out of time.
▪ With two tracks playing in Sync, and using Cue points out of time.
When a TRAKTOR DJ deck is in the Half-Sync state. The SYNC symbol of the TRAKTOR DJ
deck will be lit red, and the corresponding S4 SYNC button will flash orange.
To reset the SYNC function:
►
Press the S4's flashing SYNC button.
→
You will immediately hear the tracks align again. The S4's SYNC button is no longer
flashing orange, and TRAKTOR DJ's SYNC is lit green.
BeatGrid Edit Mode
Pressing SHIFT + SYNC engaes TRAKTOR DJ's BeatGrid Edit Mode on a corresponding Deck.
While in this mode, you can manually adjust a track's Beatgrid via:
▪ Moving the jog wheel to adjust the waveform/fixing the grid's phase.
▪ HotCues 1-4 can be used to select the correct downbeat you wish to use.
▪ Rotating the MOVE encoders will scan through a track in increments of 4 beats.
Adjust MASTER Clock Tempo
You can use the S4 to adjust TRAKTOR DJ's master clock tempo by:
►
Press and hold the MASTER button + rotate the BROWSE Encoder.
5.2.4 FLUX Buttons
Pressing either of the FLUX buttons located above the TEMPO sliders will engage TRAK-
TOR DJ's Flux Mode on the Deck. Flux mode lets you jump to cue points and loops without
losing the overall phrasing of your tracks.
Using the S4 with TRAKTOR DJ
Using the Transport Section
Traktor Kontrol S4 - Manual - 85