User Manual

4.7.3 Overdubbing
You can also dub over the current recorded loop, building additional recorder layers on the fly.
To do this:
1. Press the REC button while the Loop Recorder is already playing an existing loop, and
press REC again to exit overdubbing.
The new audio will then be added to the existing loop.
2. If you don’t like the overdub, just hit UNDO and it will clear your last overdub and you
can try it again.
3. If you hit UNDO once more, it will act as a “redo” and bring back the overdub.
4. If you want to completely clear all the contents of the Loop Recorder, just press UNDO
while the Loop Recorder is stopped.
4.7.4 Further Uses of the Recorded Loop
One of the great things about the Loop Recorder is that you can use it to record loops that you
can then transfer to the Remix Decks. To do this, we will use the Copy mode on the S4:
1. Hold down the BROWSE button to enter Copy mode.
You will see the PLAY button on the Loop Recorder start flashing, letting you know that it
contains a loop ready to be copied.
2. While holding the BROWSE button, press the PLAY or REC button on the Loop Recorder
to select it as source.
3. Still holding the BROWSE button, press any flashing Sample Play button in the Remix
Decks to select it as target.
→
Now the loop has been stored in a Sample Slot, and you can record a new loop into the
Loop Recorder if you like. Moreover, your loop now has access to all Sample-related fea-
tures provided by the Remix Deck. Last but not least, as already mentioned, the loop is
automatically added to your Collection!
Tutorials
Using the Loop Recorder
Traktor Kontrol S4 - Manual - 65