User Manual

The Loop Recorder’s DRY/WET knob.
You can stop and start again the recorded loop by using the PLAY button. By doing this, you’ll
notice the following:
▪ The Loop Recorder always stays in sync with the Deck B, which is our current tempo ref-
erence—we say “tempo master” (for more info on tempo references, check the tutorial in
section ↑4.8, Synchronization).
▪ You don’t have to bother with the DRY/WET knob position when stopping the Loop Re-
corder: when you stop the Loop Recorder, the DRY/WET knob is automatically bypassed,
whatever its current position is. This ensures a seamless transition with the main signal at
its original level.
Deleting the Loop and Trying Again
If you don’t like what you hear and want to try again:
►
Press the UNDO button when the Loop Recorder is stopped.
→
Now the recording has been cleared and you can try again.
For example, you could try again to record a loop from the track on Deck B, this time while
tweaking the FX loaded on the FX Unit 2:
1. Turn channel B’s EQ knobs back to neutral position.
2. Activate the FX Assign button “2” on channel B.
3. Press the REC button on the Loop Recorder and tweak the FX Knobs and buttons of the
FX Unit 2 as you see fit.
Since the Loop Recorder records the audio (including any processing by the FX), you can cre-
ate this way brand new loops from your existing tracks!
Tutorials
Using the Loop Recorder
Traktor Kontrol S4 - Manual - 64