User Manual

4. On channel B, press the right FX Assign button (labeled “2”) to assign Deck B to this FX
Unit as well. You can deactivate the left FX Assign button on that channel if you want to
hear the new FX more distinctly.
The FX Knobs 1-3 and the FX Buttons 2 and 3 will give you access to each of the advanced
parameters for that FX. At any time, you can press the FX Button 1 to reset the parameters to
their default value.
As for Group mode, the DRY/WET knob allows you to adjust the balance between the un-
processed (dry) signal and the processed (wet) signal.
4.6.6 Storing a Snapshot
If you find yourself making the same settings to the FX each time and would like to set a de-
fault state for the FX parameters, simply do the following:
1. Adjust the FX Knobs and Buttons to your liking.
2. Press SHIFT + MODE to store these settings as snapshot.
→
The next time you press the FX Button 1 with this FX loaded, its parameters will assume
the values you stored.
It’s now time to check another new feature introduced in TRAKTOR KONTROL S4: the Loop
Recorder.
4.7 Using the Loop Recorder
Earlier we saw how you can use Remix Decks as a means for triggering one-shot and looped
Samples. But this is how to work with existing material; the Loop Recorder, on the other hand,
allows you to record new material on the fly.
Tutorials
Adding FX
Traktor Kontrol S4 - Manual - 60