User Manual

1. Hold the SHIFT button and press the FX On button (at the far left of the FX Unit) to load
the three default effects:
You now have the Delay, the Reverb, and the Filter loaded.
2. Choose which of the three loaded effects you want to activate by pressing the correspond-
ing FX Buttons 1-3. Of course, you can use all three effects together—simply activate all
three buttons:
The FX Buttons light up to indicate the activated effects.
3. As additional step, turn the DRY/WET knob fully counterclockwise—we will use this knob
later to progressively bring in the effects:
→
Your FX Unit is now ready to process whatever you will send to it!
4.6.3 Assigning Decks to the FX Unit and Bringing In the FX
Now we need to assign this FX Unit to a Deck. To do this, we use the FX Assign buttons at the
top of each channel on the Mixer, below the GAIN encoder:
Tutorials
Adding FX
Traktor Kontrol S4 - Manual - 57