User Manual

▪ Above, the channel fader should be raised on channel A:
▪ The channel meter (the vertical bar of LEDs along the channel fader, see picture above)
should show some activity. If not, check that the HI, MID, LOW and FILTER knobs higher
up on that channel are set to center position; at the top of the channel, push the GAIN
encoder once to reset the channel’s input gain to 0 dB.
▪ At the top center of the Mixer, the MAIN LEVEL knob should be turned at least part of the
way to the right. You should see the MAIN LEVEL meters going up and down:
▪ If not, at the top center of the TRAKTOR window, check that the MAIN knob is raised:
If you see some activity on the MAIN LEVEL meters of your S4 but don’t hear any sound, then
double-check the connection starting with the cable going from the S4’s Main Outputs to your
PA.
4.2
Mixing In a Second Track
Now that you have learned how to quickly load and play tracks using the TRAKTOR KON-
TROL S4 (see the previous tutorial), let’s see how to mix in a second track. On the way, you
will learn a few basic mixing tasks that every digital DJ needs to know: how to cue tracks, syn-
chronize tracks, start the playback at the right position, and mix the tracks together using the
crossfader.
Tutorials
Mixing In a Second Track
Traktor Kontrol S4 - Manual - 30