User Manual

4 Tutorials
This chapter will guide you through the most common tasks that you will encounter during your
work with TRAKTOR KONTROL S4.
The tutorials are workflow-oriented. They start with the simplest tasks and progressively lead
you to more complex operation, helping you to get more and more familiar with your TRAK-
TOR KONTROL S4 system. After reading this, you should have the basic know-how allowing
you to mix with TRAKTOR KONTROL S4.
The tutorials presented here and in the following chapter make use of the included demo
tracks, which were copied to your hard disk during the TRAKTOR KONTROL S4 installation
procedure. Thus, you can follow these tutorials even if you haven’t imported your own music
yet into the Track Collection. For more info on how to import your music into the Collection,
please refer to chapter ↑3, Importing Your Music above.
4.1 Playing Your First Track
This first tutorial will show you how to load and play a track, how to check the needed audio
outputs and how to quickly troubleshoot your system if no music can be heard.
Prerequisites
We assume here that your TRAKTOR KONTROL S4 system is already up and running. If it’s
not the case, please follow first the instructions in the separate Setup Guide and come back
here when you’re done!
In case you already changed some settings in TRAKTOR KONTROL S4 before you start with
these tutorials, we strongly recommend you to reset your TRAKTOR KONTROL S4 system to
the factory settings by doing the following:
1. In the TRAKTOR software, click the Help menu in the menu bar at the top of your screen
(on Mac OS X) or at the top of the window (on Windows), and select Help > Start Setup
Wizard.
2. In the window that opens, click Finish at the bottom right corner without touching any-
thing else.
Tutorials
Playing Your First Track
Traktor Kontrol S4 - Manual - 25