User Manual

▪ (2) Main/Booth Outputs 1/2 1/4" sockets (1/2) : main outputs of TRAKTOR KONTROL S4
(line level, balanced). Use these sockets to connect your TRAKTOR KONTROL S4 to an
amplification system (or master mixer) with balanced inputs.
▪ (3) LEVEL knob : sets an independent Booth volume level for the ¼” outputs when the
MAIN/BOOTH switch is set to Booth.
▪ (4) Booth/Main Switch: when the MAIN/BOOTH Switch is set to Main, the ¼” outputs will
have their volume adjusted with the MAIN LEVEL knob on the top of S4. When set to
Booth, the ¼” outputs will have their volume controlled independently by the LEVEL knob
on the rear panel.
6.8.2 INPUT CHANNEL B Section
The INPUT CHANNEL B section allows you to route external signals to the TRAKTOR software.
The INPUT CHANNEL B section on the rear panel.
▪ (1) LINE/PHONO switch : Choose here the appropriate level (line or phono) for the source
connected at Inputs 3/4.
▪ (2) Line/Phono Inputs 3/4 RCA sockets (IN 3/4) : Connect here an external audio source
(turntable, CD deck, etc.).
Hardware Reference
The Rear Panel
Traktor Kontrol S4 - Manual - 154