User Manual

▪ (3) MAIN OUT section: Sockets for connecting the TRAKTOR KONTROL S4 to your main
mixer or amplification system. See section ↑6.8.1, MAIN OUT Section below.
▪ (4) INPUT CHANNEL B section: See section ↑6.8.2, INPUT CHANNEL B Section below.
▪ (5) MIC Section: See section ↑6.8.3, MIC Section .
▪ (6) INPUT CHANNEL A section: See section ↑6.8.4, INPUT CHANNEL A Section below.
▪ (7) FOOTSWITCH socket : This port can be used to attach any type of foot switch. This foot
switch can be used to trigger the record/overdub control of the Loop Recorder (see ↑6.6,
The Loop Recorder for more info).
▪ (8) MIDI IN/OUT sockets : Your TRAKTOR KONTROL S4 is also a MIDI interface. Connect
your external MIDI devices here.
▪ (9) POWER section: See section ↑6.8.5, POWER Section below.
6.8.1 MAIN OUT Section
The MAIN OUT section holds sockets for the main outputs of your TRAKTOR KONTROL S4
controller.
The MAIN OUT section on the rear panel.
▪ (1) Main Outputs 1/2 RCA sockets (1/2) : main outputs of TRAKTOR KONTROL S4 (line lev-
el, unbalanced). Use these sockets to connect your TRAKTOR KONTROL S4 to an ampli-
fication system (or master mixer) with unbalanced inputs.
Hardware Reference
The Rear Panel
Traktor Kontrol S4 - Manual - 153