User Manual

To correct the channel level, adjust the GAIN encoder at the very top of the channel. For
more info on how to set your levels correctly, see the tutorial in section ↑4.3, Adjusting
Levels.
Crossfader Assignment Indicator
The Crossfader Assignment indicator.
The Crossfader Assignment indicator shows you the side of the crossfader the channel is as-
signed to.
To change the crossfader assignment, hold SHIFT and press the desired FX Assign buttons
(see above, at the beginning of this section).
Crossfader
The crossfader.
The crossfader controls the mix between the signal(s) assigned to its left and right side. At the
center position, the crossfader has no effect: channel levels are then only defined by the re-
spective channel faders (see above). At each crossfader’s end, the opposite signals are totally
cut.
You can customize the fading curve of the crossfader in TRAKTOR’s Preferences. Please
refer to the TRAKTOR 2 Manual for more info.
You can quickly see which channels are assigned to each side of the crossfader by looking at
the Crossfader Assignment indicators right above (the pairs of little arrows). You can change
the crossfader assignments via SHIFT + FX Assign buttons. For more info on these control ele-
ments, see above in this section.
Hardware Reference
The Mixer
Traktor Kontrol S4 - Manual - 138