User Manual

Loop SIZE encoder No Loop active Loop active
Turn Selects a loop size (in beats) for the next
Floating Loop that you will set. The se-
lected loop size is displayed in the Loop
Size Display above the encoder.
Halves/doubles the Loop’s size.
Push Sets and activates a new Floating Loop
at the current playback position with the
selected loop size.
Deactivates looping.
You may have noticed that pushing either of the Loop MOVE and Loop SIZE encoders acti-
vates/deactivates looping. The only difference when activating looping via the Loop SIZE
encoder is that you additionally set a new Floating Loop at the current position.
Bear in mind that all your actions affect a Floating Loop (and not the original Stored Loop, if
any). Hence, if you plan to use the modified Loop later, don’t forget to store it! For example,
you can quickly do this by assigning the Loop to a Hotcue slot (see section ↑6.3.10, Hotcue
Buttons). Storing Loops to a Hotcue slot is only available for Track Decks.
6.3.9 REMIX SLOTS Buttons
The REMIX SLOTS buttons.
By default, the REMIX SLOTS buttons control the Sample Cells of a Remix Deck:
▪ In case the upper Deck is a Track Deck, and the lower Deck is a Remix Deck, the REMIX
SLOTS buttons will control the Remix Deck's Sample Cells.
▪ In case the upper Deck is a Remix Deck, the REMIX SLOTS buttons will control the upper
Remix Deck's Sample Cells.
The REMIX SLOTS buttons allow you to load and play Samples. Each button represents a Sam-
ple Cell in one of the four Sample Slots of a Remix Deck.
Hardware Reference
The Decks
Traktor Kontrol S4 - Manual - 120