User Manual

▪ Tempo bending: By spinning the jog wheel’s outer rim, you temporarily raise or lower the
Deck tempo. When you stop spinning the rim, the Deck tempo returns to its original val-
ue.
▪ Scratch: By pressing and spinning the jog wheel’s top plate, you fully take over manual
control for cueing up a beat, back spinning or for scratching. Also this can be very useful
to precisely locate any particular point in your track / Remix Set. When you release the top
plate, the Deck returns to its previous playback state (playing or paused).
▪ Seek: By additionally pressing SHIFT when spinning the jog wheel’s top plate, you can
fast seek through your track / Remix Set.
When you press the jog wheel’s top plate, the LOAD button above lights up to indicate that you
are manually controlling the playback position.
The jog wheel also provides additional features:
▪ Inside an active Loop, while holding the LOOP IN or LOOP OUT button depressed, use the
jog wheel to adjust the Loop In Point or Loop Out Point, respectively. See section ↑6.3.8,
Loop Section for more info on this.
▪ In Browse mode, you can use the jog wheel to scroll through the selected Playlist. See
section ↑6.7, Browsing, Loading and Copying for more info on this.
▪ Your jog wheel can also be switched to a special Jog mode providing you with advanced
features like FX control or filter control. Please refer to section ↑7.3, S4 Control Options
for more info.
6.3.7
Tempo Fader
The TEMPO fader.
Hardware Reference
The Decks
Traktor Kontrol S4 - Manual - 115