User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Introduction
- 2 Basic Concepts
- 3 Browser
- 4 Sound Slots
- 5 Creating Groups
- 6 Working with Patterns (Hardware)
- 6.1 Creating Patterns
- 6.1.1 Pattern Mode
- 6.1.2 Pad Mode
- 6.1.3 Pad Link
- 6.1.4 Releasing a Pad from a Pad Link Group
- 6.1.5 Recording the Pads
- 6.1.6 The Metronome
- 6.1.7 Using the Step Sequencer
- 6.1.8 Using Note Repeat
- 6.1.9 Using the Piano Roll/Keyboard
- 6.1.10 Recording Automation
- 6.1.11 Recording Automation in the Step Sequencer
- 6.1.12 Step Grid, Pattern Length Grid and Quantization
- 6.2 Editing Patterns
- 6.1 Creating Patterns
- 7 Working with Patterns (Software)
- 7.1 The Pattern Editor
- 7.2 Editing Patterns
- 7.2.1 Mouse Actions in the Pattern Editor
- 7.2.2 The Zoom Tool
- 7.2.3 Compare/Split
- 7.2.4 The Piano Roll / Keyboard
- 7.2.5 Recording and Editing Automation
- 7.2.6 Adding a Modulator
- 7.2.7 Step Grid, Pattern Length Grid and Quantization
- 7.2.8 Pad Link
- 7.2.9 Releasing a Pad from a Pad Link Group
- 7.2.10 Setting up a Pad as Master or Slave in a Pad Link Group
- 7.2.11 Rendering Audio from Patterns using Drag and Drop
- 7.2.12 Rendering MIDI from Patterns using Drag and Drop
- 8 The Effects Overview
- 9 Using FX
- 9.1 Applying Effects to a Sound
- 9.2 Applying Effects to a Group
- 9.3 Applying Effects to the Master
- 9.4 Bypassing Effects
- 9.5 Automating Effects and Sampler Parameters
- 9.6 Applying FX to an External Instrument
- 9.7 Recording FX Automation
- 9.8 Saving FX Presets
- 9.9 Creating a Send Effect
- 9.10 Creating a Multi Effect
- 10 Creating a Song using Scenes
- 11 Sampling and Sample Mapping
- 12 The Master Section
- 13 Exporting Audio
- 14 Appendix: Tips for playing Live
- Index
If you plug one of the internal MASCHINE effects or a plug-in effect to Module slot 1 of a
Sound, you will find this effect as a bussing point in the Output menu of other Sound slot's
Main control section (in the Control area). You can also route MIDI events to the effects in
Module slot 1.
For information on loading a Plug-in Instrument to a Sound slot please read ↑4.2.6, Page 6:
Velocity Destination and Modwheel Destination.
Hardware
1. Press the CONTROL button to select the Control mode.
2. Press Button 3 to put the focus on the SOUND tab which is selected on the left display,
then hit the pad with the Sound you want to apply the effect to.
3. Press Button 4 to put the focus on the MODULES tab.
4. On the right display, you can now see the Modules 1-4. Select Module 2 by pressing But-
ton 6.
5. To select an effect for Module 2, press SHIFT + BROWSE.
6. On the left display, use Knob 1 to set the TYPE to INTERNAL for MASCHINE FX or
PLUG-IN for VST/AU plug-ins. The right display now shows the list of the available ef-
fects. If you want to load a VST/AU plug-in effect select PLUG-IN.
7. You can browse through the available effects by turning Knob 5. When you’ve found an
effect you want to apply, press Button 8 to load it into Module 2. You can also use but-
tons 5 and 6 to step through the list and load the effect directly.
8. Switch back to Control mode by pressing the CONTROL mode button.
9. Now you can edit the effect using the knobs!
Using FX
Applying Effects to a Sound
MASCHINE - Manual - 174