User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Introduction
- 2 Basic Concepts
- 3 Browser
- 4 Sound Slots
- 5 Creating Groups
- 6 Working with Patterns (Hardware)
- 6.1 Creating Patterns
- 6.1.1 Pattern Mode
- 6.1.2 Pad Mode
- 6.1.3 Pad Link
- 6.1.4 Releasing a Pad from a Pad Link Group
- 6.1.5 Recording the Pads
- 6.1.6 The Metronome
- 6.1.7 Using the Step Sequencer
- 6.1.8 Using Note Repeat
- 6.1.9 Using the Piano Roll/Keyboard
- 6.1.10 Recording Automation
- 6.1.11 Recording Automation in the Step Sequencer
- 6.1.12 Step Grid, Pattern Length Grid and Quantization
- 6.2 Editing Patterns
- 6.1 Creating Patterns
- 7 Working with Patterns (Software)
- 7.1 The Pattern Editor
- 7.2 Editing Patterns
- 7.2.1 Mouse Actions in the Pattern Editor
- 7.2.2 The Zoom Tool
- 7.2.3 Compare/Split
- 7.2.4 The Piano Roll / Keyboard
- 7.2.5 Recording and Editing Automation
- 7.2.6 Adding a Modulator
- 7.2.7 Step Grid, Pattern Length Grid and Quantization
- 7.2.8 Pad Link
- 7.2.9 Releasing a Pad from a Pad Link Group
- 7.2.10 Setting up a Pad as Master or Slave in a Pad Link Group
- 7.2.11 Rendering Audio from Patterns using Drag and Drop
- 7.2.12 Rendering MIDI from Patterns using Drag and Drop
- 8 The Effects Overview
- 9 Using FX
- 9.1 Applying Effects to a Sound
- 9.2 Applying Effects to a Group
- 9.3 Applying Effects to the Master
- 9.4 Bypassing Effects
- 9.5 Automating Effects and Sampler Parameters
- 9.6 Applying FX to an External Instrument
- 9.7 Recording FX Automation
- 9.8 Saving FX Presets
- 9.9 Creating a Send Effect
- 9.10 Creating a Multi Effect
- 10 Creating a Song using Scenes
- 11 Sampling and Sample Mapping
- 12 The Master Section
- 13 Exporting Audio
- 14 Appendix: Tips for playing Live
- Index
3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad you want to as-
sign to a Pad Link group.
4. The name of the Sound will appear in the right display.
5. On the left display, change the Pad Link in the LINK GRP menu to the desired group us-
ing Knob 1.
6. Set the Pad Link Group (LINK MODE) to Master or Slave mode for this pad using Knob 2
7. Repeat the process to link each pad to a Pad Link group.
6.1.4 Releasing a Pad from a Pad Link Group
To release a pad from a Pad Link group:
1. Press the Group button of the pad you want to release from the Pad Link group.
2. Press the PAD MODE button.
3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad with the sound
you want to remove from a Pad Link group. The name of the Sound will appear in the
right display.
4. On the left display, change the Pad Link to OFF using Knob 1.
5. Repeat the process to remove other pads from a Pad Link group.
6.1.5 Recording the Pads
You can easily record beats with the pads: press PLAY, then RECORD to enable Record mode.
Now hit the pads you want to record and listen to what happens. Each hit will create an event
in the Pattern editor, the event length depend on how long you hold the pad.
Working with Patterns (Hardware)
Creating Patterns
MASCHINE - Manual - 113