User Manual
Table Of Contents
- _
- Table of Contents
- 1. Disclaimer
- 2. Welcome to TRAKTOR KONTROL S2
- 3. Concepts
- 4. Setting up TRAKTOR KONTROL S2
- 5. TRAKTOR KONTROL S2 Overview
- 6. Mixing Your First Tracks using SYNC
- 7. Tutorials
- 7.1. Browsing and Loading Tracks
- 7.2. Controlling Track Playback
- 7.3. Adjusting Volume Levels
- 7.4. Using the Equalizer to Tweak Your Sound
- 7.5. Adjusting Track Tempo
- 7.6. Locking the Key of Tracks
- 7.7. Playing with Mixer Effects
- 7.8. Playing with Cue Points
- 7.9. Playing with Loops
- 7.10. Snap Mode and Quantize Mode
- 7.11. Using Flux and Reverse Modes
- 7.12. Previewing Tracks using the CUE Channel
- 7.13. Working with the Preparation List
- 7.14. Adding Samples to Your Mix
- 7.15. Correcting Beatgrids of Tracks
- 7.16. Mixing Tracks Using Jog Wheels
- 8. Preferences
- 9. Integrating a Microphone
- 10. Setting the TRAKTOR KONTROL S2 as Your Default Audio Interface
TRAKTOR now analyzes the Track to determine its tempo and to create the Beatgrid and the
Waveform.
4. Press the Browser View button again to minimize the Browser View.
5. Press the Play/Pause button on Deck B to start playback.
The Waveform starts moving and the Channel Volume Meter LEDs in Mixer channel B illumi-
nate.
7.16.5. Syncing Tracks Manually
The process of manually syncing tracks consists of several steps. At first you need to align the
next track's audio signal level in Mixer channel B so that it matches to the running track's level in
Mixer channel A. Then you adjust the next track's tempo so that it matches to the running track's
tempo.
route the audio signal of Mixer channel B to the CUE channel to preview the next track and adjust
the audio signal level. Then you can manually sync next track's tempo to the running track's tempo
using the TEMPO fader and the Jog Wheel on that Deck.
in Deck B to the track in Deck A:
Adjusting the Tracks' Audio Signal Levels
To adjust the the audio signal levels:
1. Put on your headphones.
2. Press the CUE button of Mixer channel B.
Tutorials
38