User Manual
Table Of Contents
- _
- Table of Contents
- 1. Disclaimer
- 2. Welcome to TRAKTOR KONTROL S2
- 3. Concepts
- 4. Setting up TRAKTOR KONTROL S2
- 5. TRAKTOR KONTROL S2 Overview
- 6. Mixing Your First Tracks using SYNC
- 7. Tutorials
- 7.1. Browsing and Loading Tracks
- 7.2. Controlling Track Playback
- 7.3. Adjusting Volume Levels
- 7.4. Using the Equalizer to Tweak Your Sound
- 7.5. Adjusting Track Tempo
- 7.6. Locking the Key of Tracks
- 7.7. Playing with Mixer Effects
- 7.8. Playing with Cue Points
- 7.9. Playing with Loops
- 7.10. Snap Mode and Quantize Mode
- 7.11. Using Flux and Reverse Modes
- 7.12. Previewing Tracks using the CUE Channel
- 7.13. Working with the Preparation List
- 7.14. Adding Samples to Your Mix
- 7.15. Correcting Beatgrids of Tracks
- 7.16. Mixing Tracks Using Jog Wheels
- 8. Preferences
- 9. Integrating a Microphone
- 10. Setting the TRAKTOR KONTROL S2 as Your Default Audio Interface
2. Turn the BROWSE encoder to select one of your tracks in the Track List, or a demo track, for
example, Berlin Hauptbahnhof by Native Instruments.
3. Press the BROWSE encoder to load the track into the Deck.
TRAKTOR now analyzes the Track to determine its tempo and to create the Beatgrid and the
Waveform.
4. Press the Browser View button again to minimize the Browser View.
7.16.3. Starting Playback of Deck A
To start playback of the track on Deck A:
1. Press the Play/Pause button on Deck A.
The Waveform starts moving and the Channel Level Meter LEDs in the left Mixer channel A
illuminate.
2. Adjust the Mixer channel's GAIN level by turning its GAIN knob, so that the LEDs stay be-
tween 0 dB and 6 dB.
Tutorials
36