User Manual
Table Of Contents
- _
- Table of Contents
- 1. Disclaimer
- 2. Welcome to TRAKTOR KONTROL S2
- 3. Concepts
- 4. Setting up TRAKTOR KONTROL S2
- 5. TRAKTOR KONTROL S2 Overview
- 6. Mixing Your First Tracks using SYNC
- 7. Tutorials
- 7.1. Browsing and Loading Tracks
- 7.2. Controlling Track Playback
- 7.3. Adjusting Volume Levels
- 7.4. Using the Equalizer to Tweak Your Sound
- 7.5. Adjusting Track Tempo
- 7.6. Locking the Key of Tracks
- 7.7. Playing with Mixer Effects
- 7.8. Playing with Cue Points
- 7.9. Playing with Loops
- 7.10. Snap Mode and Quantize Mode
- 7.11. Using Flux and Reverse Modes
- 7.12. Previewing Tracks using the CUE Channel
- 7.13. Working with the Preparation List
- 7.14. Adding Samples to Your Mix
- 7.15. Correcting Beatgrids of Tracks
- 7.16. Mixing Tracks Using Jog Wheels
- 8. Preferences
- 9. Integrating a Microphone
- 10. Setting the TRAKTOR KONTROL S2 as Your Default Audio Interface
2. Slowly increase the volume of your audio system or active speakers to a moderate listening
level.
You now hear the audio of the track in your speakers.
6.4. Loading the Second Track into Deck B
The next track you want to mix must have a similar tempo like the playing track.
1. Press the Browser View button to maximize the Browser view in the software.
2. Turn the BROWSE encoder to select one of your tracks, or a demo track, for example Li-
sa by Native Instruments.
3. Press the BROWSE encoder to load the track into the Deck.
TRAKTOR now analyzes the Track to determine its tempo, and to create the Beatgrid and
the Waveform.
6.5. Syncing the Track Tempos
In order to sync the tempos of both tracks:
• Press the SYNC button on Deck B.
Mixing Your First Tracks using SYNC
20