User Manual
Table Of Contents
- _
- Table of Contents
- 1. Disclaimer
- 2. Welcome to TRAKTOR KONTROL S2
- 3. Concepts
- 4. Setting up TRAKTOR KONTROL S2
- 5. TRAKTOR KONTROL S2 Overview
- 6. Mixing Your First Tracks using SYNC
- 7. Tutorials
- 7.1. Browsing and Loading Tracks
- 7.2. Controlling Track Playback
- 7.3. Adjusting Volume Levels
- 7.4. Using the Equalizer to Tweak Your Sound
- 7.5. Adjusting Track Tempo
- 7.6. Locking the Key of Tracks
- 7.7. Playing with Mixer Effects
- 7.8. Playing with Cue Points
- 7.9. Playing with Loops
- 7.10. Snap Mode and Quantize Mode
- 7.11. Using Flux and Reverse Modes
- 7.12. Previewing Tracks using the CUE Channel
- 7.13. Working with the Preparation List
- 7.14. Adding Samples to Your Mix
- 7.15. Correcting Beatgrids of Tracks
- 7.16. Mixing Tracks Using Jog Wheels
- 8. Preferences
- 9. Integrating a Microphone
- 10. Setting the TRAKTOR KONTROL S2 as Your Default Audio Interface
Mixer.
(1) Mixer channel A and B: The Mixer channels A and B receive the individual audio signals from
the Decks A and B. Each Mixer channel contains controls to adjust the audio signal's frequency
content and to adjust the outgoing volume before the audio signal is send to the MASTER out-
put. For more information, refer to Mixer Channel.
(2) QNT: Allows you to enable or disable Quantize mode and Snap mode. More Information, refer
to Snap Mode and Quantize Mode.
(3) MASTER knob: Adjusts the Master volume level.
(4) MIC button: Inserts the microphone channel signal to the Master signal.
(5) SAMPLE knob: Adjusts the volume for the combined channel of Remix Deck C or D.
(6) CUE MIX control: Adjusts the signal mix between Master output signal and the CUE channel
signal in the headphones.
(7) CUE VOL control: Adjusts the volume for the CUE channel.
(8) Mixer FX SELECT buttons: Select the individual Mixer FX to be controlled with the Mixer FX
Amount knob in the Mixer channel.
TRAKTOR KONTROL S2 Overview
15