User's Manual

Table Of Contents
The Section takes its new place. On your controller in Section mode, you can now select
this Section via the pad corresponding to its new location.
Moving a Section using the Controller
To move a Section using your controller:
1. Press ARRANGER.
2. Press SHIFT + Button 2 to enter Song view.
3. Press and hold SCENE (Section) to enter Section mode (you can pin it by pressing But-
ton 1).
4. If required, press Button 7 and 8 to select the Section bank containing the Section you
want to move.
5. Press the pad of the Section you want to move.
6. Turn Knob 1 (POSITION) to move the selected Section to another position in your ar-
rangement.
The Section takes its new place. In Section mode you can now select this Section via the
pad corresponding to its new location.
16.3.6 Adjusting the Length of a Section
Here are a few rules on how Sections, Scenes and Patterns are displayed within the Arranger:
By default the length of a Section is automatically set to the longest Pattern used within the
referenced Scene (Auto Length), unless the length of the Section is manually set to a specific
bar range (Manual Length).
Working with the Arranger
Using Song View
MASCHINE - Manual - 840