User's Manual

Once the Assignment area is open, when you switch to other Parameter pages the Assignment area
follows your selection: it always shows the assignments for the page currently displayed above.
The Pages tab can be clicked only for Plug-ins, External MIDI device Control Change assignments,
and for Macro properties. For all other Plug-ins and Channel properties, parameters and Parameter
pages are not editable, and the Pages tab is grayed out and inactive. For more information on how
to assign parameters of Native Instruments or External Plug-ins to Parameter pages, please refer to
↑7.3.3, Setting Up Your Own Parameter Pages.
When the Pages pane of the Assignment area is open, you also notice a few changes in the
Control area above.
1
2
3
7
6
5
4
The Control area with Macro Properties displayed and the Pages pane active in the Assignment area underneath.
(1) Delete Page button (“x” symbol): Click the little “x” after a page name to delete this Parame-
ter page.
(2) Add Page button (“+” symbol): Click the little “+” after the last page label to append a new
page. By default, pages are labeled “Page 1,” “Page 2,” etc. You can change page labels by
defining sections within your pages via the Section Label fields (3).
(3) Section Label fields: These fields allow you to define sections of parameters within the dis-
played page. Double-click the field above the first parameter you want to include in the sec-
tion, type the desired name for the section, and press [Enter] to confirm. The new section will
Audio Routing, Remote Control, and Macro Controls
Creating Custom Sets of Parameters with the Macro Controls
MASCHINE - Manual - 640