User's Manual

Table Of Contents
The Hi-hat is an ideal candidate for making use of Choke groups! See 9.4.3, Hi-hat Memory for
more details!
Adjusting the Choke Multiple Sounds with different Choke Values
Click the MULTI label next to Choke and select the desired value from the list to set all
selected Sounds to that same Choke group. This also applies to the Master/Slave setting
next to it.
Sound slots 1 to 4 are selected. If they have different Choke values, a MULTI label appears (left). When you click it and
select a new Choke from the list (middle), this new group is applied to all selected Sounds.
This is also true when adjusting the parameter from your controller.
To assign the selected pad(s) / Sound slot(s) to a Choke group and set its/their Choke mode on
your controller:
1. Hold the PAD MODE button to enter Pad Mode.
2. If necessary, press the Page Left button to switch to the first Parameter page of the Pad
Mode.
3. Turn Knob 1 (CHOKE GROUP) to select the desired Choke group 18 for that pad or
choose NONE (default setting) to remove the pad from its current Choke group.
Playing on the Controller
Adjusting the Pads
MASCHINE - Manual - 283