User Manual

continue to play unless you hit its pad, which would change it to Gate Override sub-mode. In
this case (hitting the pad while in Gate Override sub-mode), the Sample will only play as long
as you hold the pad.
Samples which are already playing before you enter Gate Override sub-mode will continue
to play normally, unless you press their corresponding pads while in the sub-mode.
Latching Samples in Gate Override Sub-Mode
You can also latch Samples (regardless of their normal play states) while in Gate Override sub-
mode:
►
In Gate Override sub-mode, press and hold a Sample, then press the Mute (STOP) button
on its slot.
In a "gated" play state, a Sample will only play as long as you are holding its pad. As soon
as you release the pad, the Sample will stop playing. On the other hand, in a "latch" play
state, a Sample will continue to play after releasing the pad.
4.7.3 Changing the Sample Play Type
Play Type refers to whether the Sample behaves as a One-shot or as a Loop. A Sample in Loop
mode will automatically restart when its end is reached, while a Sample in One-shot mode will
stop when the end of the Sample is reached.
►
To enter Play Type sub-mode, press and release the TYPE (PITCH) button and turn the
encoder knob until you see "PL" on the Display.
When you select the Play Type sub-mode, the pads light up to show the Play Type of the Sam-
ples:
• One-shot: pad is blue.
• Loop: pad is green.
• Empty Cell: pad is off.
TRAKTOR KONTROL F1 Reference
Type Mode
TRAKTOR KONTROL F1 - Manual - 98