User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
• QUANT (EDIT)
• CAPTURE (DELETE)
• REVERSE
• TYPE (PITCH)
• SIZE (SPEED)
• BROWSE (MIDI)
4.6.1 Activating Color Mode
To toggle Color mode on and off:
►
Press SHIFT + REVERSE (COLOR).
When Color mode is active, both the SHIFT and REVERSE (COLOR) buttons blink on and off.
You can also disable Color mode by pressing the REVERSE (COLOR) button (without pressing
SHIFT).
4.6.2 Assigning Colors Using the Color Palette
While Color mode is active, pressing a single pad will transform the whole Pad Matrix into the
Color Palette selector. You can then select the color you want to assign to the pad by pressing
the pad associated with the target color.
1. Press the SHIFT + REVERSE (COLOR) buttons.
2. Select (by pressing) the pad you wish to change (the Pad Matrix shows the Color Palette
selector).
3. Press the pad showing the desired color.
4. If desired, select (by pressing) another pad for color assignment.
5. When you are finished assigning colors to the pads, press the REVERSE (COLOR) button
to return to Performance mode.
TRAKTOR KONTROL F1 Reference
Color Mode
TRAKTOR KONTROL F1 - Manual - 93