User Manual

You can quickly and easily capture the same material into any number of Sample Cells on
the Remix Deck in rapid succession. This can be useful for capturing, say, a short riff. You
can then re-pitch the different pads (using TYPE (PITCH), see ↑4.8, Pitch Mode), effective-
ly creating a number of pitched variations of the same Loop.
The capture source Deck does not have to be playing in order to capture Samples into the
Remix Deck.
4.4.8 Auto-capturing a Sample
Auto-capture is a great way to very quickly populate your Remix Deck with captured Samples.
To perform Auto-Capture:
►
With Capture mode active, press and hold CAPTURE (DELETE), then press the encoder
knob. The new Sample will be placed in the first available Sample Cell.
The F1 determines the first available Cell by examining the Sample Grid, starting in the top
left of the first page and then checking each row from left to right, top to bottom.
If the first available Sample Cell is not located on the current (visible) page, the Sample Grid
automatically scrolls to the appropriate page and a pad animation will show the location of the
new Sample. The Sample Grid then scrolls back to the original position.
Note that Auto-Capture only works if there are empty Cells in the Sample Grid. If there are
no unoccupied Cells in the Sample Grid, Auto-Capture will not work and no new Samples
will be loaded.
4.4.9 Quick-Capturing Into a Cell
With Quick-capture, you can capture a new Sample with a minimal amount of button presses.
You don't have to switch the F1 into Capture mode with Quick-capture:
1. Press and hold the CAPTURE (DELETE) button.
2. While continuing to hold the CAPTURE (DELETE) button, hit the destination pad.
3. A new Sample will be created on the pad you specified using the capture source Deck's
Loop Size. You'll also see a pad animation, confirming the action.
TRAKTOR KONTROL F1 Reference
Capture Mode
TRAKTOR KONTROL F1 - Manual - 89