User Manual

4.4.6 Loop Move and Beat Jump on Capture Source Deck
►
By rotating the encoder knob while the Loop is engaged, you change the Loop size by
moving the Loop Out marker. In addition, by holding SHIFT while rotating the encoder
knob, you can move the Loop in increments of the Loop Size.
►
With a deactivated loop, by holding SHIFT and rotating the encoder knob you can per-
form a beat jump in the amount of the Loop Size.
With the loop deactivated (the Display is not blinking), you can quickly find the part of the
Source Track you want to capture by holding SHIFT and turning the encoder knob.
4.4.7 Capturing a Sample into a Cell
Capturing a Sample into a new Sample Cell is very easy:
1. Make sure Capture mode is active (CAPTURE (DELETE) button flashing).
2. If you want the Sample start to snap to the capture source Deck's Beatgrid, make sure the
Snap function (S) is active in the software's Main section. We recommend to always have
the Snap function active when capturing Samples.
3. Press the pad where you want the Sample to be captured to.
You'll see a quick pad animation to confirm that the Sample has been created. If the pad al-
ready contained a Sample, the old Sample will be replaced with the new one.
TRAKTOR KONTROL F1 Reference
Capture Mode
TRAKTOR KONTROL F1 - Manual - 88