User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
2. While holding the button, the Display will show the current Source Deck with the letter "c"
followed by the selected Deck name (a, b, c, or d). If you select Loop Recorder, you'll see
"cL" on the Display.
3. Release the CAPTURE (DELETE) button to return the F1 to the previous mode (either Per-
formance or Capture mode).
4.4.2 Activating Capture Mode
To enter and leave Capture mode, press the CAPTURE (DELETE) button, which blinks when
Capture mode is active. In Capture mode, the display will show the Loop Size of the capture
source Deck. The numbers represent the loop length to be captured in beats.
Press CAPTURE (DELETE) to activate Capture mode.
7-segment display Beats Bars/Note Lengths
32 32 beats 8 bars
16 16 beats 4 bars
8 8 beats 2 bars
4 4 beats 1 bar
2 2 beats Half-note
1 1 beat Quarter-note
.2 Half-beat Eighth-note
.4 Quarter-beat Sixteenth-note
.8 Eighth-beat Thirty-second-note
.16 Sixteenth-beat Sixty-fourth-note
The Loop Size is the same as the capture length. In other words, if the Display shows "4" (Loop
Size = one bar) when you capture to a pad, that pad will then contain 4 beats (one bar) from
the Source Track.
TRAKTOR KONTROL F1 Reference
Capture Mode
TRAKTOR KONTROL F1 - Manual - 86